You are here: ALARMCO home > Product Information > Instaplay Information > Instaplay Technical Data

INSTAPLAYTM  Technical Specifications


,

VOICE QUALITY MODELS
    IP4-FA03     IP8-FA03     IP16-FA03     [   3:00 ]
    IP4-FA06     IP8-FA06     IP16-FA06     [   6:00 ]
    IP4-FA12     IP8-FA12     IP16-FA12     [ 12:00 ]
    IP4-FA18     IP8-FA16     IP16-FA16     [ 18:00 ]
    IP4-FA30     IP8-FA30     IP16-FA30     [ 30:00 ]
    IP4-FA48     IP8-FA48     IP16-FA48     [ 48:00 ]
    IP4-FA80     IP8-FA80     IP16-FA80     [ 80:00 ]

CAPACITY
       4, 8, or 16 Inputs
       Up to 80 minutes of recording time
       500 variable-length messages
       50 Playlists

PROGRAMMING

MESSAGE RECORDING

        ON SITE - ̶ Messages can be recorded from a telephone handset, a microphone, or loaded from the output of an audio tape, CD, or MP3 file.
        REMOTE - ̶ With the Telephone Control (-TC) option, messages can be recorded remotely over the phone line with voice prompts.

PLAYLISTS

        INSTAPLAY uses contact closure inputs to select which playlist to run.   Playlists can contain messages, relay commands, volume commands, output channel selection, and message spacing.

OPERATIONAL CONTROL

        When a Control Input is triggered from a dry contact closure, the corresponding playlist is executed. Behavior of Instaplay's Control Inputs can be programmed to suit the specific application. The installer or customer can easily choose to have a Contact Closure:
               * Queue all requested playlists or queue only new ones
               * Cancel all currently queued or running playlists and start the requested one
               * Have a priority status
               * Execute each playlist up to 9 times or indefinitely until the condition is reset
               * Cause a particular Control Input to STOP all message announcing

RELAY OUTPUTS

        One Standard Relay is automatically energized during announcements.
        Up to 8 programmable relays are available. Relays can be controlled from playlists or directly with DTMF tones.

OPERATIONAL POWER

        AC - ̶ 12 to 16 VAC
        DC - ̶ 12 to 24 VDC (Can operate from rechargeable backup battery)

AUDIO INPUTS

        Aux Input - ̶ For line-level recording
        Microphone - ̶ Low Impedance, Balanced

AUDIO OUTPUTS

        Output Format ̶ Line Level or 8 ohm Speaker Driver
        One standard; Up to 3 available. Each volume level can be adjusted automatically from playlists or with DTMF tones.

MESSAGE STORAGE

        Storage Format - ̶ Non-volatile, solid state
        Filter Frequency - ̶ 11 kHz

PHYSICAL / ENVIRONMENTAL / WARRANTY

        Industrial Grade - ̶ Operates from -40 to +85 degrees C
        Dimensions - ̶ 1-3/4" H x 15-3/4" W x 10-1/2" D
        Mounting - ̶ Rack- (1U) or Wall-Mountable
        Warranty - ̶ 1 year parts and labor

Return to Instaplay Main Page

Return to Product Overview

Return to ALARMCO's Home Page


ALARMCO * 1 Bailey Drive * Guilford, CT 06437
(800) 824-5006 * (203) 458-2646

Send us an e-mail